LWS4750 Zenith Waterborne Dry Glaze Base
Sold by the Litre. Order as 4L(Gallon)
LWS4750 GENERAL INFORMATION
Zenith™ Waterborne Glaze Base is a fast drying, interior glaze base that is specially formulated to highlight and enhance the
natural beauty of all types of wood. It is a neutral base that is used to formulate custom color glazes using Axalta’s Color Choice™
system. It has very little odor, and cleans up with water. This product is designed for professional use only. For Wood Substrates.
1. PRODUCTS • LWS4750
2. MIXING RATIO • Stir thoroughly, do not shake. If tinting, colorants must
be mixed in with a shaker or mechanical agitation such as
an air mixer or drill.
3. SHELF LIFE @ 77°F (25°C) • 24 months from manufacturing date
4. CLEAN UP • Clean equipment with warm water. If coating has dried,
acetone may be required to remove dried film. Keep
container closed when not in use to avoid skinning.
5. SURFACE PREPARATION • Surface must be clean and dust free with a moisture
content of 6-8% prior to finishing. Remove all dust,
dirt, wax and wood marks. Proper sanding and
preparation of the wood is critical to achieving
consistent results.
• On new wood, finish sand surface with 150-180 grit
sandpaper
• On previously finished wood, remove all old paint or
varnish and follow new wood procedure.
6. COMPANION PRODUCTS •Zenith™ Waterborne Colorants
•Zenith™ Waterborne Precatalyzed Lacquer
•Zenith™ Waterborne Conversion Varnish
•Can also be used as a glaze with Axalta’s solvent borne
Lacquers, Precatalyzed Lacquers and Conversion Varnishes
7. TECH NOTES • No thinning is recommended. Retarder: If needed to
increase open time, use Zenith™ Waterborne Retarder
YXT0700 at a rate of 1oz-2 oz per gl. (1-1.5% max.)* . Max
VOC after 1.5% addition of YXT0700 is 550 g/l.
8. SUBSTRATES • Commonly used furniture and cabinetry woods
• MDF/HDF
NOTE: Not to be used on exterior applications
10. APPLICATION • See application notes for details.
11. FLASH / DRY TIMES
AIR DRY @ 77°F (25°C)
12. FORCE DRY
Flash 5-8 Minutes
Bake 15 Minutes @ 130°F
Cool Down 10 Minutes ambient
Stack
13. GUN SET UP
Gravity Feed 1.6 mm - 1.8 mm
Siphon Feed 1.8 mm – 2.0 mm
Airless 10 – 15 thousandths
Air-Assisted Airless 11 – 15 thousandths
AIR PRESSURES
Gravity Feed 30-35 psi (2.0-2.4 bar)
Siphon Feed 35-40 psi (2.4-2.8 bar)
Air-Assisted Airless 5-10 psi (0.3-0.7 bar)
See spray gun manufacturer data for more information
14. PHYSICAL DATA
Viscosity N/A
Weight Solids % 20.97%
Volume Solids % 17.44%
Actual VOC 1.52 lbs/gal of Product
VOC Ratio (lb.voc/lb.solids) .82 (lbVOC/lb solid)¹
Regulatory VOC
(less water and exempt solvents) 515.15 g/l
Weight Per Gallon 8.77 lbs/gal¹
Flash Point 210ºF Closed Cup
Theoretical Coverage 279.82 ft/gal @ 1 mil dry
VHAP (lb.HAP/lb.solids) 0.0 lb VHAP/lb solid
Photochemically Reactive No
Coating Category Clear
Application Notes:
Dry to touch 30-45 Minutes
Flash between coats 2-4 Hours
To Stack